AT10II TX + R12DS RX + telem. module

Radio Link AT10II Combo 12 Channel TX/RX Mode 2 (RLKT121006)

RadioLink may well be a name that’s new to you but, rest assured, the protocol and the brand’s assured reliability is anything but. 10 years on the market and with an exponentially growing core of satisfied users this is a radio system that you’ll not only love for its features and flexibility but one you’ll grow to adore for its comfort, ease of use and solid dependability. And we haven’t even mentioned the price yet! With a range of transmitters covering everything from beginner to expert, standard features that’ll raise an enlightened eyebrow, and receiver prices that’ll have you reaching for your wallet, RadioLink has been radio modelling’s the best kept secret of recent times… But not anymore!

An updated version of the popular AT10, the AT10II, 2.4GHz upper mid-range, telemetry-capable transmitter now has 12 channels and, like its predecessor, offers a furure-proof feature-set to suit the intermediate / experienced model pilot. With an expanding hangar comes a requirement for a transmitter with an all-encompassing capability and enough channels to cope with the multi-functionality that complex model aircraft so often demand. Equipped with FHSS & DSSS frequency-hopping spread spectrum protocol you can be assured of a superior transmission rate, enhanced interference rejection and the peace of mind that comes with a rock-solid radio link. But, of course, there’s far more to it than that. If you’re an experienced flyer a quick look at the specification will confirm that this is all the transmitter wants for very little. Moreover, with amazingly competitive receiver pricing you’ll realise that you really can afford to conveniently grow, or even re-equip, your fleet. Take a look at the full feature list and make special note of the AT10II’s intuitive programming, colour LCD, telemetry features, wireless trainer link capability and striking good looks.

AT10II Features:

–Excellent Anti-interference: Only 3ms for 12 channels synchronously, Strong anti-jumping DSSS&FHSS working synchronously to keep the excellent anti-interference performance.

–Real-time Information: Model voltage, RSSI signal strength, speed, altitude, distance and more on the LCD screen display. Support extended engine voltage telemetry module PRM-01 can feedback GPS info, Speed, voltage etc. on AT10II display when work with flight controller APM or PIX.

–Multiple Alarm: Low RSSI alarm setting, low transmitter voltage, receiver voltage and extended engine voltage alarm. DD sounds and words alarming display on the backlight LCD screen to avoid ignorance when you are in noise environment.

–Voltage Protection System: RadioLink AT10II has included a circuit which prevents damage if you plug it in the wrong way. Low consumption of battery, A 3s 1800mAh liPo battery can work more than 12 hours.

–Suit Multiple Models: Support Radiolink’s R9DS, R12DSM, R6DS, R6DSM,R12DS, receiver. Works with most racer quads on the market, suitable for FPV racing drone, helicopter, multirotor, car, boat and more.

–Programmable Mix Control: 5-12CH can be customized of programmable mix control for fine control over most basic model aircraft functions.

–Variety Switches: Switches are various lengths for easy recognition and usage. 3 VR switches, 3 three-way position switches, 4 two-way position switches, 1 reset trainer switch. Support multiple aerial control mode and 2 PTZ *control

AT10II RC Transmitter Specifications:

• Channels: 12CH
• Control Distance: Up to 4000 meters in the air
• Frequency: 2.4GHz ISM bands (2400MHz to 2483.5MHz)
• Channel Bandswidth: 5.0 MHz
• Spread Spectrum: DSSS&FHSS
• Adjacent Channel rejection: 38dbm
• Transmitter Power: <100mW (20dbm )
• Operating Current: <90mA
• Operating Voltage: 7.4~15.0V
• Section Precision: 4096
• Screen: 3.5 inches 16 colorful screen, 320*480 pixels
• Support receivers: R12DS, R9DS, R6DS, R6DSM, and R12DSM

R12DS Receiver Specifications

• Signal: SBUS,PWM
• Channel: PWM 12 channels, SBUS 12 channels
• Working Voltage: 4.8-10V
• Working Current: 38-45mA(input voltage: 5V)
• Size: 5*3.2*1.5cm
• Weight: 20g

Prm-01 Voltage Telemetry Module Specifications:

• Size: 33*22*11mm (1.3″*0.87″*0.43)
• Weight (with wire): 7g (0.25oz)
• Voltage Input Range: 1S~6S LiPo Battery
• Compatible receiver: R12DS, R9DS (Old version receiver: R10DS, R10D, R9D)
• Compatible transmitter: AT10II/AT10/AT9S Pro/AT9S/AT9

Package List with Receiver:

• AT10II Transmitter  Mode 2 or Mode 1 x1
• Radiolink R12DS Receiver x 1
• Radiolink PRM-01 module x1
• Mode 1/2 changing parts x 1
• Simple user Manual x 1
• Transmitter Lanyard x 1