Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it’s necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).
SPIN opto controllers are provided with two JR connectors. Connector on the longer three-line cable with black ending is to be linked to the receiver. Connector on the shorter three-line cable with red ending is intended for communication with JETIBOX; for programming or data reading connect it into slot marked imp. + – on JETIBOX.
|Dimensions [mm]||63 x 120 x 27|
|Sustained current [A]||170|
|Operational temperature [°C]||-10 to 85|
|Supply Voltage [V]||18 to 59|
|Batteries LiXX||6 to 14|
|Max. Current BEC [A]||–|
|Voltage BEC [V]||–|
|Max. number of servos||–|
|Resistance in conducting state [mΩ]||2 x 1.00|
|Number of power transistors||30|
|Cable crossection (input/output) [mm²]||2 x 4.0 / 4.0|
|Input capacitance [µF]||6 x 820|
|OPTO (optically separated radio signal from the power management)||Yes|