Description
Magnetic (Hall) propeller position sensor for MAV Sense IBEX line ESCs enabling to stop the motor and propeller at an exact position (defined by the magnetic sensor location on the model and the magnet on the propeller/spinner).
Hall Sensor for Propeller Positioning with IBEX Brushless Controllers.
The positioning function allows you to move the motor/propeller to the exact position required for a safe landing or simply convenient for continued flying.
With only a few external components (Hall sensor and a small magnet) you can activate this function and prevent your propeller from being damaged during landing. The magnet must be properly attached to the rotating part (either motor or propeller) and the Hall sensor must be located in the fuselage or cowl to match the magnet at the target propeller position. After enabling the positioning function in the menu, also set the positioning PWM to make the motor turn slowly but smoothly.
The Hall sensor is excellent as a position sensor e.g. for landing gears, folding engines and the like.
With Jeti Duplex receivers, a servo slot can be set to “digital input”, and thus the sensor data can be transferred to the transmitter.
MAV Sense products are designed and manufactured in the Czech RepublicContains a Hall sensor to be installed to the model and a small magnet to be installed to the spinner, prop driver or propeller; the gap between the sensor and magnet should not be bigger than 1 mm.
Scope of delivery:
Hall sensor
Magnet D3mm – 0,31g
Patch cable JST – JR
Screws for hall sensor board
Total weight with patch cable only 4 grams
The set contents: Magnetic sensor w. cable, magnet, 2 screws, instruction manual.
Reviews
There are no reviews yet.