Description
It offers two operating modes – with standard width (PWM) signal outputs (11 channels) or with the S-BUS series output (12 channels).
The receiver is suitable for all types of RC models (the range specified by the manufacturer is 1100 m on the ground and 3000-4000 m in the air).
The use of DSSS/FHSS transmission technology ensures high interference resistance and allows fail-safe settings to be set in the event of failure or severe interference with the transmitter signal.
Operating modes
With individual PWM servo outputs: the red LED indicates the PWM signal output, a total of 11 channels.
With the SBUS series output: the blue/purple LED indicates the SBUS signal output, a total of 12 channels. SBUS and PWM signal outputs can be used simultaneously in SBUS operating mode. The SBUS output signal is at socket 11, sockets CH1 and CH10 simultaneously serve as PWM outputs for channel signals 3 to 12. How many PWM outputs you can use depends on how many BUS signal channels you use (e.g. if If you use 4 S-BUS signal channels, 8 PWM signal channels are available).
Binding with the transmitter is carried out using the bind button on the receiver, the operating modes are displayed with the LED diode.
The receiver is equipped with contact strips for standard UNI plugs (=JR/Graupner, Hitec, Futaba); the outputs are directed in the direction of the receiver’s longitudinal axis.
The receiver set includes: receiver R12DS, instructions.
.